VEK M1H M2H Vehicle Loop Detector C-Rail Mount

VEKM1H VEKM2H vehicle loop detector

Overview

Functionality and reliability are of utmost importance for any vehicle control solution. One important factor of any such solution is the correct and repeated count of vehicles. Vehicles are detected by inductive loops that are evaluated by vehicle inductive loop detectors. Our vehicle inductive loop detectors provide the quality and accuracy needed to support parking, traffic and access control systems.
Our Feig Electronics inductive loop detector product family provides a quality that is unmatched in the industry. Especially the VEK M2H and VEK M1H DIN Rail detectors as well as the plug-in VEK MNE product family will not only provide you the reliability to detect vehicles but also a convenient installation method.
We also offer a variety of non-inductive vehicle detectors such as T30 vehicle presence detectors, motion detectors, as well as our Watchman Low clearance alarm bar which prevents personal vehicles, delivery trucks, as well as forklifts to enter doors and openings that are too low for the vehicle.

Characteristics

Inductive Loop Detector

VEKM1H VEKM2H (also known as MID1E-800 and MID2E-800) inductive loop detector for vehicle detection. The VEKM series Vehicle loop detector provides the functionality, reliability, and ease of use needed for for any vehicle parking detection application. All settings are easily adjustable using DIP-Switches. Two LED’s provide instant feedback for the induction loop status. No manual is needed, all necessary settings and terminations are printed directly on the loop detector housing. A quick disconnect terminal allows for fast replacement without disconnecting the inductive loop wires.

The VEKM1H VEKM2H vehicle loop detector series is a C-Rail mountable detector that comes in 1 channel and 2 channel configuration.

The VEKM1H VEKM2H vehicle loop detector come in a small form factor that fits in all spaces and mounts on a standard 35 Din Rail.

Variations
  • VEKM1H -vehicle loop detector (1-channel)
  • VEKM2H-vehicle loop detector (2-channel)
  • MID2E-800-vehicle loop detector (2-channel)
  • MID1E-800-vehicle loop detector (1-channel)
Special Characteristics:
  • Plastic housing with compact size to be mounted directly on DIN – or C-rail
  • Direct cabling, no plug socket
  • Microprocessor controlled
  • Isolation transformer between loop and detector electronics
  • Automatic Calibration when switching on or when changing the adjustment of holding time
  • Adjustment of unlimited holding time possible
  • Indication with LED`s
  • All adjustments with DIP – switch on front panel
  • Adjustments of relay functionality
Features
  • Isolation transformer between loop and detector electronics
  • Automatic calibration when switching on or changing the adjustment of holding time
  • Plastic housing with compact size to be mounted directly on DIN-rail (wiring on the housing)
  • Adjustment of unlimited holding time possible
  • All adjustments with DIP-switch on front panel
  • Directional Logic for VEKM2H
  • Permanent or pulse output adjustable Models
Data Sheet
Download